ProFlame®PNPO-G1 Halogen-free FR for polyolefins

PNPO-G1 is a halogen-free flame retardant , which develops its effectivenessthrough phosphorus / nitrogen synergism. When incorporated into thermoplastics, it exhibits high processing stability. PNPO-G1 doesn’t contain ammonium polyphosphate (APP), It can replace FP-2200S/FP2500S series of ADEKA (Japan). 

Benefits 

• Non-halogenated flame retardant with favorable environmental and health profile 

• Suited for PP, PE, PP copolymers and PP blends for injection moulding and extrusion applications 

• Low smoke density and low smoke gas corrosivity 

• Good electrical and mechanical properties 

• Excellent UV stability 

• Good recyclability

Processing instruction: 

1. The optimum conditions for incorporating should be determined in each individual case. Care must be taken to ensure homogeneous dispersion of all components. 

2.Both single- and twin-screw extruders are suitable for incorporating the product. The temperature of the polymer melt should not exceed 250°C. 

 3.Choosing proper filler and control dosage .Normally ,the filler will reduce Flame retardant efficiency. 

4.When a water bath is used for cooling the strands, it is advisable to keep the passage through the water bath as short as possible to permit optimum evaporation of any entrained water. 

Package & Storage: 

Net weight 20-25KG Kraft bag with PE liner.