Contact: Ms.Katherine

Recommend dosage:

16-20% dosage can reach 1.6mm V-0 standard in Nylon and PBT reinforced system.

Processing instruction:

1. Pre-drying the Polyamide,PBT, PET ,the moisture content should be below 0.1 % (by wt.) for polyamide,

0.05% for PBT , and 0.005% for PET.

2. The temperature of the polymer melt should not exceed 350 °C.

3. It is most suitable for equipment with weak shear force.

4. Do not use low-alkali or high-alkali fiberglass. High-quality non-alkali fiberglass is preferred.