ProFlame® PNPO Halogen-free flame retardant for PP
Benefits
• Shows high processing stability in contrast to similar competitive material
• Particularly effective in thermoplastic polyolefins (e. g. polyolefin hotmelts),
urethanes (e. g. integral skin foams, rigid foams, sealants), and epoxy resins
(adhesives,sealants, structural laminates, gelcoats)
• Positive secondary fire effects such as low smoke density, lower formation of toxic
smoke or corrosive gases
• Non-halogenated flame retardant with favorable environmental and health profile
Processing instruction:
1. The optimum conditions for incorporating should be determined in each
individual case. Care must be taken to ensure homogeneous dispersion of all
components.
2.Both single- and twin-screw extruders are suitable for incorporating the product.
The temperature of the polymer melt should not exceed 230°C.
3.Choosing proper filler and control dosage .Normally ,the filler will reduct Flame
retardant efficiency.
4.When a water bath is used for cooling the strands, it is advisable to keep the
passage through the water bath as short as possible to permit optimum evaporation
of any entrained water.