Halongen-free Intumescent flame retardant PNPO for PP
Welcome: novista
Language: 中文版 ∷  English

Flame retardant for Polyolefins

  • Halongen-free Intumescent flame retardant PNPO for PP
Halongen-free Intumescent flame retardant PNPO for PP

Halongen-free Intumescent flame retardant PNPO for PP

  • Product description: Halongen-free Intumescent flame retardant PNPO for PP
  • INQUIRY

PNPO is a Halogen-Free flame retardant , which develops its effectiveness through phosphorus/nitrogen synergism. When incorporated into polyolefine, it shows high processing stability and no migration.PNPO differs in its mode of action from halogenated flame retardants in the fire. When the polyolefine on exposure to flame, the carbon foam layer formed protects the polymer through its heat insulating effect to reduce further oxygen access and prevent dripping of the polymer. At the same time there are no halogen hydride gases to cause.


Benefits

Shows high processing stability in contrast to similar competitive material

• Particularly effective in thermoplastic polyolefins (e. g. polyolefin hotmelts), urethanes (e. g. integral skin foams, rigid foams, sealants), and epoxy resins (adhesives, sealants, structural laminates, gelcoats)

Positive secondary fire effects such as low smoke density, lower formation of toxic smoke or corrosive gases

Non-halogenated flame retardant with favorable environmental and health profile


Technical Data:

Items                                                                                            Spec
Appearance                                                                White free-flowing powder
P content, %                                                                      24-27
1% TGA Temperature, °C                                                   ≥250
Average particle size, um                                                   D50≤15

PH value                                                                          5.0-7.5
Volatile,%                                                                         ≤0.5
Whiteness                                                                         ≥90.0
Solubility in water, 25°C , g/100mL H2O                                 ≤0.5


Recommended dosage:

Polymer

PP

PP

PP

HDPE

Dosage,%

22-25

25-28

28-32

32-36

UL-94

V-0(3.2mm)

V-0(1.6mm)

V-0(0.8mm)

V-0(1.6mm)

Remark: Oxide index reach 34% with dosage 25% in PP

Processing instruction:

1. The optimum conditions for incorporating should be determined in each individual case. Care must be taken to ensure homogeneous dispersion of all components.
2.Both single- and twin-screw extruders are suitable for incorporating the product. The temperature of the polymer melt should not exceed 230°C.
3.Choosing proper filler and control dosage .Normally ,the filler will reduct Flame retardant efficiency.
4.When a water bath is used for cooling the strands, it is advisable to keep the passage through the water bath as short as possible to permit optimum evaporation of any entrained water.


Package & Storage:
Net weight 25KG Kraft bag with PE liner.
It is not dangerous cargo .You should handle the material according to the instruction described on SDS.




Reference Formula:

Items

Formula 1

Formula 2

Formula 3

PP 7926

750

720

700

PNPO

250

280

300

EBS

3

3

3

1010

2

2

2

168

2

2

2

PTFE

0

0

0

Silicone oil/coupling agent NT201

2

2

2

V-0(3.2mm)

V-0(1.6mm)

V-0(0.8mm)